I was teaching. It was very busy. I did not have time for the web. Sewed but photos and writing about it took too long and by the end of the day, me no write words good. Me no good read blogs too. To unwind, there was knitting and Netflix. There was Knitflix.
I have missed almost a year of the internet. I'm sure many people won, that memes were hatched and hashtagged and things were amaze-balls and awesome sauce. I saw a little bit of it. Not much. I'll try to go back and skim a bit to catch up but for the first time EVER after such a long hiatus, I'm not going to read everything. I usually do but I've been gone too long and feedly only goes back thirty days...
I did miss you, though.
Anyhoo.... August is my month for the Canadians Bee and the Queen suggested that I get the tutorial/instructions up early. So, away we go!
This scarf is the inspiration for this month.
I would like Chevron Blocks - sewn herringbone-style.
We're looking way outside my colour comfort zone and focussing mostly on the reddish family of purples. Accents include yellow, orange, dark pink, red, teal-ish-turquoise-y blue and navy. Try to pick really saturated fabrics, tone on tone or solids, and avoid any prints with significant traces of white, grey or black. Also, skip green entirely. Where we're going, we don't need green.... The Kona colours I pulled for examples (not mandatory...) are cerise, persimmon, cheddar, caribbean, red plum, geranium, dark violet and poppy. I give you the names because purples are notoriously difficult to photograph.
You need a square of purple about 4 3/4" and several strips of your purple and accent colour between 1 1/4" and 2". Press all seams open.
Step 1: Slice your purple square on the diagonal to give you two triangles. The diagonal becomes the top of your block half.
Step 2: Take one strip and sew to the left short side of triangle. Press seams open and trim the end off. Use the remnant of same fabric strip to sew down the right short side. Trim the end square.
Repeat Step 2 using a different fabric each time until the block measures just over the finished height (12 1/2"). Use the same process to fill in the corners.
Step 3: Centring the triangle along the top as best you can, trim the block half to 6 1/2 x 12 1/2".
Tips: I found it easiest to rough-trim my block half as I went, keeping it about 7" wide to leave some wiggle room and give me an idea of where to start the next strip. That way, I never wasted the strips by leaving them way too long, nor were they ever too short to meet the full width of the block half.
I also found it easier to "pre-cut" my strips before I sewed them so I wasn't dealing with dragging long strips all over the place.
Thanks - and happy sewing!